O2Go Fishing Oxygen Systems for Keeping Fish and Bait in Bait Tanks and Livewells

COMPLETE FISHING OXYGEN SYSTEMS TO MAINTAIN
YOUR TOURNAMENT FISH OR DELICATE BAIT
IN A HEALTHY AND LIVELY CONDITION

FISHING
OXYGEN REGULATORS

Keep your tournament fish and bait
healthy and lively!

KA902-O2

Practice Catch & Release!

6 MONTH WARRANTY AGAINST DEFECTS & WORKMANSHIP,
PLUS
LIMITED-LIFETIME
REPLACEMENT WARRANTY

KA902-O2 Regulator
Introductory Price $179.95
Weight: 1.63 lbs

The KeepAlive O2GO™ is the answer for a quality oxygen regulator with a price for all anglers. Rugged body components of brass, and nickel plated brass to withstand the rigors and harshness of the marine environment.

11 Settings: OFF, 1/32, 1/16, ⅛, 1/4, ½, ¾, 1, 1½, 2, and 4 liters per minute. These settings will allow various oxygen ratios with inexpensive air stones. The KA902-O2 also provides sufficient pressure and oxygen for premium quality diffusers as our KA970-O2, KA975 and KA9100 diffuser. At it's largest setting, the KA970 and KA975 will consume 3/4 liters per minute.

Nickel Plated Brass with special internal components. Designed for use in a marine environment.

Nut and Nipple style regulator body for use with CGA 540 Inlet Valve Cylinders.

Oxygen tank pressure gauge with gauge protector. Barbed Outlet for direct attachment of oxygen tubing.

Designed for use in a marine environment.
Warning: Not for medical use.

CYLINDERS

1/16 LPM FLOW RATE:
11" approximately 68 hours.
15" approximately 113 hours.
24" approximately 181 hours..

CYLINDER DIMENSIONS (Not including valve)
Small: 11" Tall, 4.38" Diameter, 255 liters.
Medium" 15" Tall, 4.38" Diameter, 425 liters.
Large: 24" Tall, 4.38" Diameter, 680 liters.

Cylinders have a white coat of baked on bonded powder paint.

24", 15", and 11" cylinders
shown with diffuser and regulator

Warning: Not for medical use. Use industrial oxygen available from local welding shops

CYLINDERS

KA911 Cylinder $109.95
KA915 Cylinder $119.95
KA924 Cylinder $129.95

O2GO uses Brass CGA 540 Inlet Cylinder Valves. Cylinders can be refilled from inexpensive commercial welding oxygen sources.

KA902-O2 O2GO Regulator with KA915 Cylinder, and KA970-O2 Diffuser

DELIVERY SYSTEMS

DIFFUSERS

O2Go Diffusers are the finest quality in the industry. They are ideal when a 12 volt source is not available, or current flow is not needed to school bait fish. Any lesser quality diffusers will produce larger bubbles and consume more oxygen.
A DIFFUSER IS YOUR DELIVERY SYSTEM. DON'T SKIMP. BUY THE BEST!

KA970-02 Diffuser $49.95

Features and Benefits

The KA970 is one of the most efficient diffusers on the market. It use less gas and requires fewer diffusers to achieve the same results.
Strong construction. The ceramic plate is set in a stainless steel frame and a stainless steel hose barb.
Easy to install and simple to operate. It requires no power or complex attachment procedures.
Warranty - 2 years covering defective materials and workmanship.

Diffusing Area: 3" Diameter (7.6 cm) 7 sq. inches
Overall Size: 3.4" Diameter (8.6 cm)

One of the simplest ways to dissolve oxygen in water is to introduce the oxygen as small bubbles. The smaller the bubbles the more efficient the absorption of oxygen.

Our microbubble oxygen diffuser produces a cloud of extremely fine bubbles - 100 to 500 microns. This is much finer than graphite or carborundum diffusers porous hose, and because the diffuser is flat, the bubbles do not coalesce as with circular section diffusers.

Our diffuser uses an ultra fine pore ceramic plate which ensures uniform bubbles across its entire surface. The ceramic is a clean and inert material.

Our diffuser requires a regulator with a minimum of 25-35 lbs of output pressure.

KA975 Diffuser $79.95

Features and Benefits

One of the most efficient diffusers on the market. It uses less gas and requires fewer diffusers to achieve the same results.
Robust construction. The ceramic plate is set in a rigid enamel coated aluminum frame and will not break if frozen.
Easy to install and simple to operate. It requires no power or complex attachment procedures.
Warranty - 2 years covering defective materials and workmanship.

.75 Liter Per Minute Diffuser

Bubbling pressure	25 to 35 psi. (1.7 to 2.4 bar)
Absorption efficiency	Largely depends on submerged depth (or operating pressure), typically 40% to 50% at 1m depth; can be as high as 80% or even 100% at depths of 6m or more (also depends on flow rate).

Model	.75
Diffusing area	6" x 1 1/8" (15cm x 3cm)
Overall size	8 1/2" x 1 3/4" (22cm x 4.5cm)
Weight	0.6lbs (310g)
Recommended operating range	up to 0.75 LPM (1.6 SCFH)
Maximum flow rate @ 50 psi (3.5 bar)	2.2 LPM (4.7 SCFH)
Gas inlet connection	3/16" Hose Barb.

FLEXIBLE TRANS-FILLS

Trans-fills with safety features cannot be stressed enough.
Keep SAFETY first when filling your own cylinders!
KeepAlive Transfills are the SAFEST trans-fills available for anglers.

NOT RECOMMENDED

A rigid trans-fill has inherent deficiencies and should not be used!

Filling a cylinder with a rigid trans-fill can be hazardous! Stress due to the weight of a cylinder on the trans-fill and associated connections may separate and result in serious injuries.
Most rigid trans-fills do not have a slow filling orifice, Cylinders can overheat to dangerous levels and cylinders may be damaged.

KA950 FLEXIBLE TRANS-FILL

KA950 FLEXIBLE TRANS-FILL

KA950 $299.95

Safety Features

Flexible high pressure hose. Cylinder can be placed on a solid surface while filling.
A slow filling orifice to prevent overheating of cylinders and hazardous conditions.
Single gauge will monitor filling cylinder pressure with filling cylinder valve open.
Single gauge will monitor supply cylinder pressure with filling cylinder valve closed.
Bleed valve to remove 2000 lbs of pressure from trans-fill before loosening and removing connections.

SAFETY FIRST AND ALWAYS!

NOT RECOMMENDED

A rigid trans-fill has inherent deficiencies and should not be used!

Filling a cylinder with a rigid trans-fill can be hazardous! Stress due to the weight of a cylinder on the trans-fill and associated connections may separate and result in serious injuries.
Most rigid trans-fills do not have a slow filling orifice, Cylinders can overheat to dangerous levels and cylinders may be damaged.